Set swtich after battery replacement

Rispondi
jpdeekay
Messaggi: 1
Iscritto il: 29/04/2022, 23:43
Modello Camper: Rimor Katamarano

Set swtich after battery replacement

Messaggio da jpdeekay » 29/04/2022, 23:49

Hello,

I own a Rimor Katamarano equiped with AL120nb switch. I replaced the AGM batterie with a new one with same capacity (100Ah).

The battery never get fully charged. I have 100W solar panel and even after days connected to 230V, the control panel drops 1 bar once I switch a light on.

Is there any setting to input new battery nominal specs ?

Thanks
Jean-Philippe
Avatar utente
SimoneR
Amministratore
Amministratore
Messaggi: 582
Iscritto il: 03/09/2015, 8:46
Località: Monteriggioni

Re: Set swtich after battery replacement

Messaggio da SimoneR » 30/04/2022, 10:47

When all the LEDs are on, the battery voltage is about 13.8V. When you disconnect the 220V it is normal for the voltage to drop (this is the normal operation of the batteries) and therefore the first green LED on the control panel turns off.
Rispondi