ArSilicii

Hi, pls i need deactivate dc-dc charger on my arsilicii al310x.
Is it possible to deactivate only charging? I need to keep all the functions of the al310x (refrigerator with the engine running)
I want install lifepo4 batterie and external ac-dc charger and dc-dc charger.
Thanks Michal.

To install dc/dc converter you need to disconnect Motor battery from charger.
If you interested we ha e a System for lithium battery. You can find it at www.arsilicii.com/en/batteries.

Ok. Contact M2 Possitive and contact M4 negative disconect.
Contact M1 D+? Stay connected? Thanks Michal.

To use 12V for fridge with Engine run, you should not disconnect D+ wire.

Thanks for info.

HI,please i need a help .I disconnect the charger 230v.I have new charger /lifepo4/ and i disconect al310x from 230v.I need on a panel setting paralel on, It is posible,turn on paralel funcion on panel without 230v? Or how deactivate charging on al310x (remove fuse?)

Thanks Michal

Hello. To activate parallel you need to connect external voltage on our charger.

Ok,there is a possibility disconnect only charger?

To disconnect the charge you can disconnect 220V connector from charger.