No status from AL320 on the display
Inviato: 07/08/2019, 0:08
After installing a new fridge i don't get any information of the AL320.
It looks like the communication between the display and the inverter is not working.
The inverter is still working (it charges the battery of the home-part) when connected to 230V. The motorbattery is not charged then but i can't select parralel
The display works also fine for the other parts (lights, pump, and level of watertanks)
Any idea wat might be wrong?
I tested the new fridge on 12V, then on gas. When i connected the 230V again, the problem occurred. System went down watervalve opened and display turned off.
Kind regards
F. Helmantel
It looks like the communication between the display and the inverter is not working.
The inverter is still working (it charges the battery of the home-part) when connected to 230V. The motorbattery is not charged then but i can't select parralel
The display works also fine for the other parts (lights, pump, and level of watertanks)
Any idea wat might be wrong?
I tested the new fridge on 12V, then on gas. When i connected the 230V again, the problem occurred. System went down watervalve opened and display turned off.
Kind regards
F. Helmantel