Pagina 1 di 1

AL310X REPAIR ADVICE

Inviato: 30/01/2018, 21:44
da dncleaver
I have an AL310X unit on my Rimor Superbrig. The charger unit has failed and I have opened the cover to inspect it. I can clearly see two "burnt out" components marked "ZNR1" and "ZNR2", as well as a blown fuse. Please can someone tell me PRECISELY what those two components are and also what size fuse needs to be fitted? I am capable of undertaking the repair, once I know exactly what the damaged components are.

In addition, I would also like to know the purpose of the two thin wires which join the main charging circuit board to the smaller switching board at the front of the unit. On my particular unit, the two wires are coloured yellow and green.

Thanks in advance for any help.

David
(UK)

Re: AL310X REPAIR ADVICE

Inviato: 02/02/2018, 7:02
da SimoneR
Hello
Two components are NTC and the fuse is 6A model. Your problem caused by an extravoltage on 220V.
One internal wire is for regulate charging voltage with 220V and other wire is to show when you connect output voltage.

Re: AL310X REPAIR ADVICE

Inviato: 12/07/2018, 19:50
da frita
I have the same failure. Do i need exaclty the same element 15g241k? Or could be a little different? For examle 14N391 ?

Re: AL310X REPAIR ADVICE

Inviato: 13/07/2018, 12:08
da SimoneR
Hello. We suggest to use original model 15g241k