La ricerca ha trovato 5 risultati

da ze_carrilho
03/01/2021, 13:15
Forum: Sistema AS D2NA (R-CAN)
Argomento: AL320
Risposte: 5
Visite : 7743

Re: AL320

Hello SimoneR
tks for yr reply.
I will check D+ connection as i think alternator signal is not reaching the fridge.

Stay safe

ZC
da ze_carrilho
28/12/2020, 16:40
Forum: Sistema AS D2NA (R-CAN)
Argomento: AL320
Risposte: 5
Visite : 7743

Re: AL320 AES fridge connection

Hello Simone my AES fridge power line is connected to cell battery . The fridge ground line is connected to AL320 on F4 and the signal line (12v low power for fridge electronics) is connected to AL320 on F2 (fridge light). Is this setup correct? If not, how an AES fridge should be correctly connecte...
da ze_carrilho
02/09/2020, 12:45
Forum: Sistema a Nodi
Argomento: problemi con centralina pompa
Risposte: 13
Visite : 22359

Re: problemi con centralina pompa

Hello i bought a new nsa1.10 from ArSilicii and installed it. After connecting all the wiring i managed to turn the pump on from the control panel and had readings of the clear water tank. When i opened a water tap the pump did not started and the pump light on the control panel went off and the cle...
da ze_carrilho
25/08/2020, 14:48
Forum: Sistema a Nodi
Argomento: problemi con centralina pompa
Risposte: 13
Visite : 22359

Re: problemi con centralina pompa

hello tks for your reply my pump model is nsa1.10 and i will send picture of it to mail assistenza.tecnica as soon as possible. Another question: i have installed a second clear water tank. Does the nsa1.10 has the ability of reading the water level in this second tank? I want this info to be displa...
da ze_carrilho
25/08/2020, 12:16
Forum: Sistema a Nodi
Argomento: problemi con centralina pompa
Risposte: 13
Visite : 22359

Pump node problem

Hello, My Rimor has an AL320rc system and the pump node stopped giving power to the Fiamma Aqua8 pump and also is not showing water levels. When it is without load it sends 12v but when connected to pump the voltage drops and pump does not work (the pump when connected directly to 12v works). My que...